Copper Sealtite 2000
®
Non-Asphaltic Thru-Wall Flashing
In 1999, our President and CEO, Richard Lolley, developed and
patented (U.S. Patent # 6,696,141) a process for manufacturing
non-asphaltic copper fabric flashing. This flashing would take all the
benefits of copper fabric flashing and add the additional benefits of...
·
Compatibility with most water based latex sealants on the market.
·
Lighter product, which allows us to put more lineal footage on a
roll, allowing for fewer lap joints.
·
Forms a natural copper drip edge.
·
LEED credits.
Description:
Copper Sealtite 2000
®
is manufactured in a 2, 3 or 5 oz. The copper is
bonded on both sides to glass fabric with a non-asphaltic adhesive.
Features:
Copper Sealtite 2000
®
is a permanent, premium quality laminated
thru-wall flashing consisting of five (5) layers of time proven
sustainable waterproofing materials combined under heat and
pressure into a single sheet. It is flexible and is easily formed by
hand at the jobsite.
ADVANCED
TECHNOLOGY
for copper
flashings
Standard
Sizes:
12" x 60'
16" x 60'
18" x 60'
20" x 60'
24" x 60'
32" x 60'
36" x 60'
Special sizes
upon request
Copper Fabric Flashing
Asphalt coated copper flashings have been used for approximately
100 years. The longevity of copper has proven to withstand the test
of time. All copper flashings manufactured by Advanced Building
Products come with
a life of the wall warranty.
Description:
Copper Fabric is manufactured from a full sheet of 2, 3, 5 or 7 oz.
copper bonded on both sides to glass fabric with an asphaltic coating.
Features:
Copper Fabric is a permanent, premium quality laminated thru-wall
flashing consisting of five (5) layers of time proven waterproofing
materials combined under heat and pressure into a single sheet.
It is flexible and is easily formed by hand at the jobsite. The asphalt
coating protects the copper during installation and acts as a bonding
agent when installed within the mortar joint.
At right: Three
recommended
ways to attach
thru-wall flashing
to the backer wall.
Flashing secured with
a termination bar
Flashing secured in a
masonry reglet
Flashing secured in a
masonry joint
Standard
Sizes:
12" x 25'
16" x 25'
18" x 25'
20" x 25'
24" x 25'
32" x 25'
36" x 25'
Special sizes
upon request
7