formerly gray Seal
Strip-n-Flash
TM
Green
Description:
Strip-N-FlashTM Green (formerly Gray Seal) is an improved
non-asphaltic economical 40 mil. UV resistant flashing suitable
for residential and commercial applications.
The Strip-N-Flash
TM
Green advantage...
·
Self-adhering.
·
Durable, affordable and easy to install.
·
Will not drool in warm climates.
·
Will not become brittle in cold climates.
·
UV resistant.
·
Compatible with all contact cements.
·
Extreme puncture and tear resistance.
·
Resistant to acids and alkali in fresh mortar.
·
Mold and Mildew resistant.
·
Made from recycled material.
Standard
Sizes:
12" x 50'
16" x 50'
18" x 50'
20" x 50'
24" x 50'
32" x 50'
36" x 50'
Primer
Low VOC Waterproofing Primer
Description:
Primer Seal is a high quality, rubberized, low VOC primer, formulated for the
professional waterproofing contractor.
Typical Uses:
This quick dry, high-tack primer provides maximum bond to asphalt,
concrete, masonry and metal surfaces.
Application:
Apply with a long nap roller or spray equipment at the rate of 250 to 300
square feet per gallon. Allow to cure until the surface is tacky, but will not
transfer when touched. Primer should be allowed to dry a minimum of 1
hour, and a maximum of 8 hours. Do not thin with organic solvents.
Safety:
For safety, health, and handling information contact Advanced Building
Products at 1-800-252-2306 for Material Safety Data Sheets (MSDS).
Available in 5-gallon pails
Property Results
Weight per Gallon 7.53 lbs
Solids Content 38% by weight
Tack Free Time 30 min. @ 75°F
VOC Less than 450 grams/litre
Flash Point <68°F
Packaging
5 Gallon pails
* All values stated as nominal at time of manufacture.
Technical Data*
www.advancedflashing.com
11